Vehicle information

Vehicle information shows fuel, range, distance, and engine readings. This screen does not change the readings.

Open the screen

  1. Open the FrostNav app.
  2. Touch "Vehicle information" in the side menu. On the home panel, touch the "Vehicle information" shortcut.

Read the readings

  1. Turn the ignition on.
  2. If there is no connection, the screen says "Waiting for the vehicle. Turn on the ignition and tap Refresh."
  3. Touch "Refresh". When the connection is open, the status is "Vehicle connection active".

If a reading is missing, the card shows "—". "Active only" keeps the cards that have a value.

Filters

FilterWhat it shows
AllEvery card.
GeneralFuel, range, distance, battery, coolant, gear, and vehicle status.
TripThe trip, the counters, average speed, and this trip's consumption.
FuelFuel level, range, consumption, and the low-fuel warning.
EngineEngine speed, vehicle speed, battery, coolant, and gear.

Cards

CardWhat it reads
Fuel levelFuel in the tank.
Remaining rangeDistance left on the remaining fuel.
Range correctionThe total-range correction.
Total distanceThe odometer.
Trip distanceThe current trip.
After counter resetDistance after the counter was reset.
Since vehicle startDistance in this start.
Average speedAverage speed.
Average consumptionAverage fuel consumption.
Average consumption this tripConsumption for this start.
Fuel used summaryFuel used.
Low fuel warningWhether the warning is on.
Battery voltageBattery voltage.
Coolant temperatureCoolant temperature.
Engine speedEngine speed.
Vehicle speedThe measured speed.
Dashboard speedThe speed the cluster shows.
GearThe selected gear.
Vehicle statusThe vehicle power state.

Technical checks

  1. Touch "Technical checks".
  2. The car's EngMode app opens.

If the app is missing, the screen says "EngMode app not found". If permission is missing, it says "Could not open EngMode (permission denied)".